(UNIT WITH EASY ACCESS KIT)
SELLS AT $49.95 each. plus shipping.
INSTALLED AT $95.00 each.
Installation Instructions
Step 1 Empty contents of holding tank(s).
Step 2 Locate an access area for the flusher to be mounted. The flusher may be mounted in the end
or the side of tanks.
Step 3 Drill a 1-3/8" diameter hole about 2" from the top of the tank, positioned as near the center as
possible. Note: Keep away from toilet inlet pipe.
Step 4 Apply 100% silicone sealer (Do NOT substitute!) about 1/4" thick and completely covering the
inside of the flange. When installed, this should ooze out around the edge of the flange, forming a
continous seal.
Step 5 Insert the Superflusher into the hole. Fasten the Superflusher using the sheet metal screws
provided in the package. Allow the silicone to completely dry before using the Superflusher.
First empty the contents of the graywater tank. Attach a hose and flush the tank for a few minutes.
Repeat this procedure in the blackwater tank. Flushing time may vary but we recommend 2-4 minutes.
Call us at 509-995-9620 after 3:30 P.M. PST and before 9 PM PST and we'll ship it to you!
or
See us at one of our scheduled rallies and we can install it for you!!